Suspension

HardDrive remote reservoir rear shocks by RacingBros feature full adjustability with preload, compression and rebound adjusters to easily adapt to ...

Chrome replacement shocks for most 4-speed Big Twins and Sportsters available with short cover shroud. Fitment: Fits Big Twins 1973-1986

Chrome replacement shocks for most 4-speed Big Twins shovelheads  Fitment: Fits Big Twin 1973-1986

Chrome replacement shocks for most 4-speed Big Twin Shovelhead models.  Feature a full chrome cover for that vintage look. Available in 11" or 12"...

Chrome Replacement shocks for Harley Ironhead Sportster models from 1954-1978.  14.5" long from eye to eye. Fitment XL Models 1954-1978

Chrome replacement shocks for most 4-speed Big Twins and Sportsters, available with short cover shroud. 13.5" Fitment: FL Models 1958-1972 ...

13.5" Long replacement shocks for most FL model Big Twins and Ironhead Sportsters. Feature full chrome cover shroud. 13.5" long from eye to eye....

These replacement and extended 39mm fork tubes fit Harley Evolution Sportster and Dyna Narrow Glide front ends. They feature a hard chrome finish a...

35mm fork tubes for Harley Ironhead Sportster and Harley Shovelhead fork tubes are hard chrome finish and available in extended, standard or shorte...

Black aluminum 3" risers for aftermarket springer forks. Features a matte-black finish and comes with 1/2-20 bolts, socket-head screws and washers....

Elevate your ride's aesthetics and performance with our premium 4" Springer Risers in dazzling chrome. Designed meticulously for motorcycling enthu...

Black aluminum 6" risers for aftermarket springer-type forks. Features a matte-black finish and comes with 1/2-20 bolts, socket-head screws and was...

6 3/4" Black Rubber Boots that fit 39mm forks on FXD Dyna & XL Sportster Model Harleys.  Books keep your sliders clean from road grime and just...

8" chrome springer risers for 1" handlebars.  Springer risers are hollow allowing you to bolt down through the top of the riser into the springer l...

Vintage inline Knucklehead / Panhead style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgra...

This Vintage style Black and copper springer front end will make your chopper or bobber build stand out from the rest. Replicated after the Harley ...

This custom black and copper springer front end for Harley and custom frames will set your ride off and give it that vintage look.  one inch fro...

Reproduction of original style Springer shock. Use on our Vintage Style Springer front ends Dampens spring bounce Adds nostalgic look to Choppe...

Reproduction of original style Springer shock. Use on our Vintage Style Springer front ends Dampens spring bounce Adds nostalgic look to Chopper/B...

Replace those worn our riser bushings in your factory late model Harley Davidson Springer risers. Springer handlebar riser stud kit includes studs ...

Made from high strength high impact 713 Tenzaloy Alloy. The Stellings and Hellings style angled risers are designed to work with our standard width...

This Throttle Addiction standard width springer top clamp for OEM 1936-1946 Harley style springer front ends and most aftermarket reproduction fron...

If you have been looking for options to run narrow handlebars on your early OEM style springer look no further. This Hellings and Stellings Style N...

This is a complete set consisting of a Throttle Addiction standard width springer top clamp for OEM 1936-1946 Harley style springer front ends and ...

This is a complete set consisting of a Throttle Addiction narrowed springer top clamp for OEM 1936-1946 Harley style springer front ends and most a...

These Throttle Addiction Custom Narrow Hydra-Glide 41mm triples trees will shave inches off your front end width.  Throttle Addiction acquired this...

Colony Steering Stem Nut/Lockwasher Kit Precision-machined stock stem nut and stamped steel lock washer For models without steering damper Mad...

This Throttle Addiction standard width springer top clamp for OEM 1936-1946 Harley style springer front ends and most aftermarket reproduction fron...

If you have been looking for options to run narrow handlebars on your early OEM style springer look no further. This Hellings and Stellings Style N...

This is a complete set consisting of a Throttle Addiction standard width springer top clamp for OEM 1936-1946 Harley style springer front ends and ...

This is a complete set consisting of a Throttle Addiction bronze narrowed springer top clamp for OEM 1936-1946 Harley style springer front ends and...

Drag Specialties High-Performance Mineral Fork Oil - 10wt Medium -1 U.S. Quart Recommended for use in both OEM and aftermarket fork assembli...

Drag Specialties High-Performance Mineral Fork Oil - 20wt Heavy -1 U.S. Quart Recommended for use in both OEM and aftermarket fork assemblie...

This top clamp is the only clamp on the market that will allow you to run bolt on risers and still keep your handlebars nice and narrow. Designed t...

These trees take styling cues from the original Hydra-Glide front ends but have a bit of their own unique flare as well.  They are stock narrow gli...

This axle is designed to work with our 41mm narrow glide trees or any trees that are around 7in on center and the early style Panhead/gen shovel ta...

Vintage style springer front end, replicated after the Harley Davidson Big Twin springer yet incorporates modern upgrades.  Includes chrome top cla...

Springer Fork unitized tree and riser for inline Spring Forks, Big Twins, 45" models and most custom chopper forks. Features a cast steel construct...

Springer 1" Lower Rockers - Chrome For use with Mid USA Vintage springers Chrome Finish 1" bushings Grease Zerk Fittings Includes two rocke...

These 39 mm Fork Tube Extensions are a quick easy solution to adding a little length to your front end. Does not require disassembly of fork lowers...

These 39 mm Fork Tube Extensions are a quick easy solution to adding a little length to your front end. Does not require disassembly of fork lowers...

Fork Slider Rebuild Kit - 35 mm - '84-'87 35mm Includes all parts needed for complete rebuild of front fork leg assemblies - does not include bush...

Fork Slider Rebuild Kit - 41 mm Includes all parts needed for complete rebuild of front fork leg assemblies 86-98 FLT/FLHT/FLHR/FLTRFLST ...

FLSTS complete spring fork assembly with chrome finish is stock length and includes risers, neck stem bearings, races, dust shields, top tree, cali...

Triumph Fork Seals - 71-78 Sold in pairs

Triumph Fork Seals - 64-70 Triumph 500/650 Sold in pairs  

Springer riser studs for mounting standard risers with an aftermarket springer. Most aftermarket springers are 1/2" X 20 thread, this allows you to...